Seismic digital accelerometer MTSS-1033A-ND
MTSS-1033A-ND is a seismic digital accelerometer.
The model is designed to measure strong motion, monitor and analyze industrial vibrations both as an accelerometer in seismic alarm systems and as a standalone instrument.
Three identical compact sensitive elements with an electrodynamic force-balance feedback allow for a precision and high stability. This model is designed for input signals of up to ±3g and has a self-noise level of 130 ng/√Hz at 10 Hz.
Application notes on using MTSS-1033A-ND to construct real-time monitoring systems for a bridge as an example.
Click here for available downloads to operate MTSS-1033A-ND.Characteristics Delivery and warranty
| Delivery set | GPS antenna, Wi-Fi antenna, cables |
| Frequency range | 0.1 Hz - 120 Hz |
| Sensitivity | 2,4 V/g - single-ended output 4,8 V/g - differential output |
| Clip level | ±3g |
| Self noise at 1 Hz | 130 ng/√Hz at 10 Hz |
| Dynamic range | 130 dB |
| Nonlinearity | 0.1% at 1 Hz |
| Sensitivity axes | 3 orthogonal |
| Supply voltage | 5 V from USB (4.5 - 5.5 V permissible) 12 V (9 - 36 V permissible) |
| Power consumption | 1 W average; 2,5 W peak |
| Temperature range | -40...+55°C |
| Gain coefficients | 1, 2, 4, 8, 12 |
| Case connectors | 10-pin RS-10 Russian type multifunctional connector; SMA-M connector for GPS antenna; SMA-M connector for Wi-Fi antenna; standard USB-B connector for data reading |
| Maximum installation tilt | any |
| ADC sampling rate | 1, 10, 50, 100, 125, 250, 500, 1000 Hz |
| ADC resolution | 24 bit |
| ADC noise performance | 21.6 bits noise-free resolution at 100 sps |
| Data recording mode | continuous, schedule |
| Data recording format | internal binary; miniSEED, SEG converters provided |
| Data storage | microSD 32 GB |
| Data transfer | USB 2.0, Wi-Fi |
| Cross-axes sensitivity | -60 dB |
| Inbuilt sensors for device health monitoring | temperature, main supply voltage |
| Cold-start time | 15-30 min |
| Leveling, mass locking | none required |
| GNSS receiver | GPS / GLONASS |
| GNSS timing accuracy | < 1µs |
| Case material | aluminum |
| Dimensions | 150 х 150 х 110 mm |
| Weight | 3 kg |